LTE Broadband

As time goes, Huawei is always presenting new 4G WiFi routers to the public. Most of the end-users may know the old router model but may be unfamiliar with the new LTE router. Many people may know the Huawei Router B315, Huawei B525 router, which is similar to the Huawei E5186 Specs . If they would buy a Huawei 4G WiFi router , you can ask what difference between Huawei B525 and B315 LTE CPE is, and which one is better between the Huawei B315 and B525?

Appearance and Interfaces

Huawei Router B315 and B525 are both in the shape of a traditional home router. They look similar from the appearance. LED indicators for power, mode, WiFi, LAN, and signal. The Huawei logo is in the middle of the front face. There are 4 LAN ports (One for LAN / WAN), One RJ11 for phone, One USB 2.0 port for data sharing, and Reset hole listed on a line. However, Huawei B315 has many variant models; the interfaces may vary on some variant models. There are two SMA-female connectors for external antennas, if you would buy Huawei B315s antenna , remember the connector should be SMA-male. The connectors are covered by a small cap.

The power and WPS buttons of the two routers are located at the top edge side. The SIM card slot of Huawei B525 router is located at the bottom of the device, where the label is also there with some important information such as model number, IMEI & S/N number, SSID, WiFi key, WPS pin, FCC ID, Manufacturer, and Made-in-China. The label of Huawei B315 is also at the bottom, however, the SIM card slot is on the side of the body. The Huawei B525 uses Micro-SIM size while the B315s uses standard SIM size.

Specs

From the appearance, you may not get the key point about the difference between the two router because they are very similar in the appearance. Then we have to check the specs of Huawei B525 router and B315 LTE CPE for reference:  

Conclusion  

From the specs of the two routers in the table, we can see the Huawei 4G Router B525 supports LTE Category 6 networks with carrier aggregation, so it could achieve download speed up to 300Mbps, which is almost the double of that of B315 Router. This should be the key difference between the two routers. As we can see, the Huawei B525 has only two variant models: Huawei B525s-23a and B525s-65a. Huawei B315 has more variant models such as B315s-936, B315s-22, B315s-607 and B315s-608 etc.. The variant models support different LTE frequency bands for various network carriers worldwide.

So Huawei Router with Huge LTE frequency bands, you can get support from Huawei B525 currently. However, if the Huawei B525 could support the LTE bands from your network providers, buy a Huawei B525 router would be right. Of course, the advanced Huawei B525 would be more than B315, but not too much. And the LTE-A router Huawei B525 would definitely provide faster speed than B315 with same network conditions. 

Sourcing from https://www.4gltemall.com/blog/huawei-b525-vs-huawei-b315/

With the development of LTE networks, LTE Advanced is now becoming the mainstream. So the LTE-A WiFi Routers are more and more popular, which would provide faster speed than that on LTE category 3 or LTE category 4. Huawei E5186 is the world’s first LTE-A router and was very popular in 2016 and 2017. Now the new upgraded Huawei B715 router is available. In this article, we will compare Huawei E5186 and B715 router to see what the difference between the two routers is and which one is better.

Appearance and Interfaces

Since Huawei LTE CPE E5186 was popular in Europe and Australia in past two years, many people may know it well. Like many other Huawei stationary routers, there are few indicators on the front, such as Power, Mode, WiFi, Voice, Signal. And Huawei logo is in the middle front face. On the back, there are 4 LAN ports (one for LAN/WAN), two RJ11 Telephone port, and USB 2.0 port available. The power switch on/off button is also lined with the interfaces. Huawei Router B715 also has 4 LAN ports (One for LAN/WAN), but it has only one telephone port with the USB 2.0 port. They both use Micro SIM card size. The difference is that the SIM card of Huawei E5186 is located at the edge side while Huawei B715 router has the SIM card slot at the bottom. And they both have two SMA connectors for an external antenna. If you would buy 4G LTE Antenna with two SMA connectors, you can switch the internal antenna to external antenna in the web interface.

Specs and variant models

The predecessor Huawei B593 LTE router has more than 10 variant models. Unlike Huawei 4G CPE B593, Huawei E5186 has two variant models: Huawei E5186s-61a and E5186s-22a, even though it’s available for two years. The Huawei B715 was presented to market since the end of 2017, so it has only one sub-model Huawei B715s-23c. In the table below, you will see the details specs and features of Huawei B715 and E5186:  

Conclusion

It’s obvious to see that the Huawei B715s-23c router is more advanced than Huawei E5186. The Huawei E5186 supports LTE category 6 technology which could achieve download speed up to 300Mbps, which is good for most people in daily life. However, the more advanced Huawei B715 would support peak download speed up to 450Mbps, which is 1.5 times faster than that of E5186. Although we didn’t know the chipset model of Huawei B715, the Huawei B715 seems powerful on the LTE technology, including carrier aggregation, 4 x 4 MIMO, TDD&FDD networks support.

So if you want to buy a better Huawei LTE-A router, it’s no doubt that Huawei B715 is the right model. However, as we said, the Huawei E5186 is enough for most cases in daily life or small office. With budget price, if you want to get a decent router without a high price, Huawei E5186 is highly recommended. It’s popular in the past two years and gains high praise from thousands of users worldwide.

A few years ago, Huawei presented its first mobile 3G router with Ethernet port Huawei E5151 (In China, it’s called Huawei E5 LAN). Now many mobile hotspots with Ethernet connection are available from many vendors. Today, we would like to review five Huawei mobile hotspots with Ethernet port, including Huawei 3G mobile WiFi hotspot with Ethernet port and Huawei 4G Mobile WiFi Hotspots with Ethernet Port.

Huawei E5885[/caption] Why people need a 3G/4G hotspot with Ethernet port? Usually, many people use 3G mobile hotspots or 4G mobile hotspots on the go. The mobile hotspots usually have a SIM card slot, so that users can connect to the hotspot wirelessly. However, if the SIM card signal is not available or only Ethernet connection is available, it’s the show time for the mobile hotspot with Ethernet port. And the business people or somebody who usually travel overseas may face this trouble. In this situation, you may need a 3G/4G LTE hotspot with Ethernet port.   Best Seller – Huawei 3G/4G Mobile Hotspot with Ethernet Port

1. Huawei E5885 (Also named Huawei Mobile WiFi Pro 2)
2. Huawei E5770 (Also named Huawei Mobile WiFi Pro)
3. Huawei E5730
4. Huawei E5351
5. Huawei E5151

Huawei E5770 in black and Huawei E5730 in white

From the name, you may don’t know what the difference is between the five mobile hotspots with Ethernet port. The Huawei E5885 and E5770 are two 4G mobile hotspots with Ethernet port while the rest three models(E5730, E5351 and E5151) are 3G mobile hotspots. We make the table below about the specs and features of the five mobile routers for your reference. Let’s see the Huawei 4G mobile hotspots with Ethernet port:

Huawei E5351

And below is the Huawei 3G Mobile WiFi Hotspot with Ethernet Port:

Huawei E5151

They are the best sellers of Huawei Mobile Hotspots with Ethernet port. The Ethernet Port in the devices is for WAN & LAN. Here now, there are many mobile hotspots with Ethernet from other manufacturers, but some of them are only for LAN, not for WAN, which means you can only connect to the network via 4G SIM card. You cannot connect to WLAN network via Ethernet port.  

The above mobile hotspots with Ethernet port support LTE to LTE-A networks, and 3G mobile hotspots available. You may find one for yourself if you have demand for such functions. And we have to mention that the large battery capacity in the Huawei E5885, E5770, and E5730, which can also charge other devices such as smartphones, gadgets etc…This could also be praised for the practical function.

After the release of Netgear Aircard 810s, Netgear then presents the fastest mobile WiFi hotspot Nighthawk M1. The two mobile WLAN hotspots are well-known because they are with very fast LTE modems, which makes Netgear Wireless dominates the wireless gadgets equipment. Based on Qualcomm high-level chipset, the AirCard 810 Hotspot can achieve downlink up to 600 Mbit/s while the Nighthawk M1 can even reach up to 1 GBit/s in the downlink. The Nighthawk M1 also has the advanced features, but even the AirCard 810 hotspot has its advantages, as this comparison shows.

The Netgear AirCard 810 LTE Router has been available in many countries for a few years. When it’s first available in the market, it’s the fastest LTE hotspot (LTE Cat11, up to 600 Mbit/s). In our test, the AC810 proves its ability for wireless connection. The Netgear Nighthawk M1 is to be regarded as a direct successor to the AirCard 810 hotspot and has been officially available in the market since the second half of 2017. However, the concept of the AirCard series was only partially continued, and the Nighthawk open a new series for Netgear LTE advanced Pro gadgets.

Appearance and Interfaces

The design of the two Netgear LTE hotspots is very different. The AirCard 810 router is significantly smaller than the Nighthawk M1, but still comparatively large for a mobile LTE hotspot. The big touchscreen display on the front of the AC810 catches the eye. The Nighthawk M1 also has a very eye-catching display, but the round screen has no touch function. On the display, the AirCard 810 router seems has more advantages.  

In terms of connections, the Nighthawk M1 mobile router is far ahead than Aircard 810. In addition to USB Type C for charging and connecting to the computer, the M1 offers a standard USB port for use as a power bank (charging other devices) as well as an RJ45 Gigabit Ethernet LAN port. Both WLAN hotspots are equipped with two TS-9 connections, to which an external mobile radio antenna can be connected. The battery is changeable in both devices; the Nighthawk M1 has a much stronger battery of 5040mAh, compared with the AC810 2930mAh battery capacity. In addition, the two mobile routers use SIM size in Micro SIM card.

LTE modem: Cat.11 VS Cat.16

On the datasheet, the Qualcomm LTE modem in the Netgear Nighthawk M1 is significantly more powerful than the AirCard 810 router. The Nighthawk M1 not only supports up to fourfold channel bundling (4CC CA), but also the 4 × 4 MIMO antenna technology. The AirCard 810 Router can handle a maximum of three carrier aggregation and 2 × 2 MIMO. The 256QAM modulation is available in both two routers.  

In practice, the maximum speed was limited more by the mobile network than by the router, so there were hardly any differences between the two devices (tested with unlimited rates from Vodafone and Telekom). However, there were differences in "simple" LTE reception without channel bundling. Here, the Nighthawk M1 was often a little faster on the go. Even in the UMTS network, the Nighthawk M1 has usually made a little faster speed in the downlink than the AC810. By the way, GSM/2G cannot be handled in both hotspots.

WLAN Features

The Netgear Nighthawk M1 offers the slightly better wireless network performance compared to the AirCard 810 router and the slightly better gross data rates, as shown by the test with multiple devices. Both devices support WLAN at dual-band 2.4 GHz and 5 GHz. There is a difference in the maximum number of devices simultaneously connected via WLAN: up to 20 simultaneous users are possible with the Nighthawk M1, only 15 with the AC810.   Both the Netgear AC810 and the Netgear Nighthawk M1 offer a so-called offload function, also known as "WLAN Extender". As an alternative to the integrated mobile modem, the user can use an existing WLAN connection as Internet access. In the case of the Nighthawk M1, Internet access can alternatively also be established via the RJ45 LAN interface. The offload function is particularly interesting in hotels, at events or in the home and can help to save data volume on the mobile rate.

Operation and software

In terms of operation and configuration, the two Netgear LTE routers differ only minimally. Of course, the AirCard 810 hotspot offers the advantage of the touchscreen display, so some settings can be made conveniently directly on the router. With the Nighthawk M1, you either have to call up the web interface via a browser or use the Netgear Mobile App (available for Android and iOS). If you want to change the AC810 more than just basic things, you have to use the web interface or the app there as well.  

The web interface offers a bit more features compared to the Netgear Nighthawk M1, but the AC810 is by no means badly positioned here. Both devices are easy and uncomplicated to use, the app is suitable for less technically savvy users, maybe even better for the operation than the web interface.  

Conclusion

In direct comparison, the Nighthawk M1 is clearly the better router. The modem is better and provides for higher data rates than average, there is an RJ45 LAN connection and the battery has been improved significantly compared to the AirCard 810 again. The waiver of a touch screen is a pity, even though, it’s still given the high price of around 459.00USD. With WLAN, the Nighthawk M1 also offers advantages over the AC810, the range is slightly better and the data rates are higher in many situations.  

Anyone who is prepared to pay the currently quite high price, clearly gets the better mobile hotspot Nighthawk M1. But the AirCard 810 router is still far from being old-fashioned: Compared to the Nighthawk M1, the 810s aircard offers a more compact and pocket-compatible size and can be operated via touchscreen. You do not have to know too much about the technology, the software is largely identical. For around 250USD, you will not get disappointed with the AC810.  

With the popularity of 4G LTE networks, more and more customers are changing their home routers from ADSL to 4G LTE Gateways. Since Huawei router gateway has a good reputation, many end-users are interested in Huawei home router WiFi. However, some of them are unfamiliar with Huawei 4G LTE routers, which may cause them in trouble when trying to buy a Huawei 4G Router, especially the Huawei routers’ names are very similar, for example, the Huawei B525 and B529. From the model number, you can’t identify what’s the difference between the two routers and which one is better. In this article, you will find the answer.

Huawei B525 VS B529 Appearance and Interfaces

From the model number, you may not know the key difference, but once you get the two router in hand, you may find the two name-similar router are very different. The Huawei B525 is a traditional stationary router. On the front, there are few indicators for the internet connection, power, network mode, signal and WiFi. On the back, there are 4 LAN ports (One of them is for WAN/LAN), one RJ45 telephone and one USB 2.0 port. However, the Huawei B529 HomeNet box looks not like a router; it's in a shape of a cube and looks like a piece of cake, really. The available specific model is Huawei B529s-23a for T-mobile. On the front, there is T-mobile logo with LED indicators of Mode, LAN, WiFi, and Power. Below the LED indicators, the power button and light button. On the back, there is only one Ethernet LAN port for PC with the power plug port. On the upper part, there are two connectors for an external antenna. The connector type is TS-9.

The design of Huawei B529 is very special and we have to mention. In the middle of the Huawei B529, there is a light line which divides the router into two parts. However, unlike its predecessor T-mobile HomeNet box Huawei E5170, the two parts of Huawei B529 cannot be divided. The highlight of Huawei B529 is the built-in battery of 3000mAh, which could let the Huawei B529 working on the go for working around 8-10 hours. The two routers have the similar feature is that the SIM card slot is at the bottom, and they both use micro SIM card size.  

Specs and Variant Models To support various LTE frequency bands in different areas, Huawei B525 4g cat6 router has two variant models: Huawei B525s-23a and B525s-65a. Huawei B529 has only one variant model B529s-23a, which is only available for T-mobile. From the appearance, you may not get the key difference and which one is better. Below the table will list the Huawei B525 specs and Huawei B529 specs, and other features. You may reference the two Huawei routers.

Conclusion

The Huawei B525 4G fix router and Huawei B529 cube are same level Huawei 4G routers supporting LTE Category 6, which could achieve download speed up to 300mbps. The main difference is on the interface ports and variant models for different LTE frequency bands. Huawei B525 has more Ethernet ports and a telephone port for more terminals. And the Huawei B525s-65a covers all the LTE bands on Huawei B529S-23a. So if you don’t focus on the built-in battery in Huawei B529 Router, the Huawei B525 would be the right one for your home or office. The advantage of Huawei B529 is the non-removable battery, which can make users to take the router outdoor or using it on the go. If you don’t need the Ethernet port or telephone port in Huawei B525, Huawei B529 Router would be the right one for you.